This is how I made a really cheap solar pool heater, and it works! It is a simple coiled hose attached to a wood frame and placed on the hot concrete. The pu…
Have something to add? Please consider leaving a comment, or if you want to stay updated you can subscribe to the RSS feed to have future articles delivered to your feed reader.
17 Responses to Homemade Solar Pool Heater & Build ( Super Cheap )
Now, what of you connected one end of the pipe to one of the jets inside the pool so you would have to use an the electrical pump? Would that cause the pool pump to work harder?
cool idea. im thinking if you spaced the rings out a bit more, you would create more surface area in contact with the sun, should increase energy absorption by at least 25% to 33% from what you see already.
Id prefer a cold pool to that great ugly monstrosity sitting beside me. Mount it on an angle on a piece of roof tin, then vacuum seal it under glass.. THEN you will see some results!!
You may want to use a solar powered pump or attach to the jet streams of your pool. That will save you even more on electricity and really make your heater solar.
So you wouldn’t have to use the electrical pump…
JanColdwater
July 31, 2013 at 4:21 am
Now, what of you connected one end of the pipe to one of the jets inside the pool so you would have to use an the electrical pump? Would that cause the pool pump to work harder?
JanColdwater
July 31, 2013 at 4:41 am
Great. Now I gotta take a leak…..
dcveem3
July 31, 2013 at 4:44 am
This small setup doesn’t do a whole lot for a larger pool, however, It did seem to offset the energy lost at night.
Pilesofplenty
July 31, 2013 at 5:18 am
not much, its a low wattage pond, fountain pump. I will hook up a meter and find out soon, just about to open the pool.
Pilesofplenty
July 31, 2013 at 5:51 am
the pool i have is about 10,000 gallons. whats your thoughts on this working for me
25tprice
July 31, 2013 at 6:06 am
How much electricity are you using
ratedEG
July 31, 2013 at 6:11 am
cool idea. im thinking if you spaced the rings out a bit more, you would create more surface area in contact with the sun, should increase energy absorption by at least 25% to 33% from what you see already.
ichigeri
July 31, 2013 at 6:35 am
I am looking to heat a 17ft round pool holding about 8,500 gallons of water.
With the size of your solar system, what size pool is it heating?
Thanks for your responce.
Jennifer W.C.
July 31, 2013 at 6:57 am
I have a friend that did this. He said it was definitely worth the effort.
Glenn Hough
July 31, 2013 at 7:47 am
It is similar to Sil-O-Flex polyethylene water pipe, I had a roll that came from the county water department.
Pilesofplenty
July 31, 2013 at 8:11 am
what type of tubing is that?
bputubebp
July 31, 2013 at 9:09 am
This was a quick setup, using cheap easy to get parts. Something almost anybody could do. Would work best on small pools.
Pilesofplenty
July 31, 2013 at 9:16 am
Id prefer a cold pool to that great ugly monstrosity sitting beside me. Mount it on an angle on a piece of roof tin, then vacuum seal it under glass.. THEN you will see some results!!
se7en1976
July 31, 2013 at 9:43 am
If i used the eyelets I would have to start the pump on a timer, which means that I would have to re plumb the system. So, not this year…
Pilesofplenty
July 31, 2013 at 9:51 am
solar pump would be a great plus, I don’t have one, but this pump is low wattage and could be run on a small inverter.
Pilesofplenty
July 31, 2013 at 10:49 am
You may want to use a solar powered pump or attach to the jet streams of your pool. That will save you even more on electricity and really make your heater solar.
zurisfeet
July 31, 2013 at 11:35 am